Electric Bottle Sterilisers and Dryers: How They Work, How to Choose, and Safe Use
How electric bottle sterilisers and dryers work, when your baby needs one, and how to compare steam, boiling, microwave, and cold water options safely.
PBy Pramod RimalPublished Updated 17 min read

On this page
- Key points
- What an electric steriliser and dryer does
- Why washing comes before sterilising
- Do you actually need an electric steriliser and dryer?
- Comparing sterilising methods side by side
- How to choose an electric steriliser and dryer
- What you can and cannot put inside
- Step-by-step: using and descaling your machine
- Age stages: when to sterilise and when to stop
- Official advice in Australia, the UK, the US and Canada
- Common mistakes to avoid
- Frequently asked questions
- Sources
Short answer: An electric bottle steriliser and dryer uses hot steam to kill germs on baby feeding gear. It then blows warm, filtered air to dry everything inside. You still need to wash bottles in hot soapy water first. In Australia and the UK, health groups say to sterilise feeding gear until 12 months. In the US and Canada, rules focus most on newborns, premature babies, and unwell babies.
This guide explains how electric sterilisers and dryers work. It compares them with boiling, microwave steam, and cold water soaking. It also shares official advice from Australia, the UK, the US, and Canada side by side.
Key points
- Wash first: Steam cannot clean away dried milk. Always wash bottles and teats in hot soapy water before sterilising.
- Why drying helps: Germs grow fast in damp places. A built-in dryer leaves bottles ready to store or use.
- How it works: Water boils on a hot plate to make steam. A fan then pushes warm air through a filter to dry the gear.
- Age rules vary: Australia and the UK recommend sterilising until 12 months. The US and Canada focus on the first few months and high-risk babies.
- Safety first: Keep the machine away from edges and small hands. Hot steam can burn skin badly.
- Descale often: Tap water leaves white chalky marks on the hot plate. Clean it with vinegar or citric acid as the manual says.
What an electric steriliser and dryer does
An electric steriliser and dryer is a benchtop kitchen machine. It does two jobs in one unit. First, it steams baby bottles, teats, and dummies to kill harmful germs. Second, it dries them with warm air.
Newborn babies have weak immune systems. Their bodies are still learning to fight off bugs. Milk is rich in nutrients, so bacteria love to grow in leftover milk drops. A small amount of dirty milk can give a young baby a sore tummy, vomiting, or diarrhoea.
Washing with soap removes food and grease. Sterilising goes one step further. High heat kills the tiny germs you cannot see. In the past, parents boiled pots of water on the stove. Today, many families use an electric machine because it turns itself off.
How the steam stage works
The base of the machine holds a metal heating plate. You pour a small measured amount of water onto this plate. When you press start, the plate heats up fast and boils the water.
Hot steam rises through the tray and fills the whole chamber. The lid traps the steam inside. Because steam is very hot, it reaches inside narrow bottle necks and small teat holes. After a set time, the heater switches off.
How the drying stage works
A plain steam steriliser stops after steaming. The bottles come out dripping wet. You then have to air-dry them on a rack or assemble them while wet. Wet bottles sitting on a bench can pick up dust or grow mould.
A steriliser and dryer adds a fan and a gentle heater in the base. Once the steam cycle ends, the fan pulls room air through a small filter. It warms that air and blows it up around the bottles. Moisture leaves through vents in the lid. When the cycle finishes, the bottles are dry and ready to put together.
Why washing comes before sterilising
A steriliser is not a dishwasher. It cannot scrub off dried milk, fat, or formula powder. If milk stays on a bottle, steam hits the milk film instead of the plastic or glass underneath. Germs can hide under that film and survive the heat.
Follow these simple steps before you load your machine:
- Wash your hands: Use soap and warm water for at least 20 seconds. Dry them on a clean towel.
- Take everything apart: Pull the teat (also called a bottle nipple) out of the collar ring. Take off any vents, valves, or caps.
- Rinse right after a feed: Cold tap water stops milk from sticking to the sides.
- Wash in hot soapy water: Use a clean basin or bowl, not the bare sink. Sink drains hold lots of germs.
- Use bottle and teat brushes: Scrub inside the bottle, around the screw threads, and inside the teat tip. Squeeze soapy water through the teat hole.
- Rinse well: Use clean running water to wash away all soap bubbles.
Only use your bottle brushes for baby feeding gear. Do not use the same sponge you use to wipe the bench or scrub dirty plates. Replace brushes when the bristles look worn or bent.
What about using a dishwasher?
Many bottles say they are dishwasher safe on the top rack. A dishwasher with a hot water wash and a heated dry cycle cleans very well. The US Centers for Disease Control and Prevention (CDC) says a hot dishwasher cycle can sanitise bottles for healthy babies.
However, Australia's Raising Children Network and the UK National Health Service (NHS) point out a catch. A normal dishwasher wash cleans bottles, but it may not sterilise them enough for young babies in those countries. Also, dishwashers can leave tiny food bits inside narrow teats. If you use a dishwasher, check every teat by hand and run a steam cycle afterwards if your local health guide advises it.
Do you actually need an electric steriliser and dryer?
Every family has different needs. You do not have to buy an electric steriliser and dryer to keep your baby safe. Plain boiling water in a pot does the same germ-killing job for free.
Still, many parents find a steam-and-dry machine saves time and bench stress. It helps most in these situations:
- Formula feeding: When your baby has six to eight bottles a day, boiling pots gets tiring fast.
- Exclusive pumping: Breast pump flanges, valves, and storage bottles have lots of small parts. Drying them on a towel takes hours.
- Twins or multiples: Double the feeds means double the washing and drying.
- Humid homes: In damp or tropical weather, bottles on a rack stay wet all day. A dryer solves that problem.
- Small kitchens: One compact unit replaces a big drying rack and a sterilising pot.
- Babies at higher risk: Babies born early (premature) or babies with weak immune systems need extra care with clean gear.
When might you skip it? If you breastfeed directly and only give an odd bottle, a pot on the stove or a small microwave bag may be plenty. If you are short on bench space, a big electric unit can feel bulky. Think about how you plan to feed your baby before you buy.
Comparing sterilising methods side by side
There are five main ways to sterilise baby bottles at home. All of them work well when you follow the rules. The table below compares them on cost, speed, drying, and ease of use.
| Method | How it works | Drying included? | Main pros | Main watch-outs |
|---|---|---|---|---|
| Electric steam steriliser and dryer | Boils a little water to make steam, then blows warm filtered air | Yes, built in | Hands-off, dries gear for storage, turns off alone | Takes up bench space, needs regular descaling, higher cost |
| Electric steam steriliser only | Boils water to make steam inside a lidded tub | No | Fast steam cycle, cheaper than combo units, turns off alone | Bottles come out wet and need air drying or quick assembly |
| Microwave steam steriliser | Plastic tub holds water and heats in a microwave | No | Low cost, light, good for small kitchens and travel | Must fit inside your microwave, can be hot to lift out |
| Boiling in a pot | Submerges gear in a pot of rolling boiling water | No | Free if you own a big pot, works anywhere with a stove | Must watch the stove, easy to melt parts if water boils dry |
| Cold water solution | Soaks gear in water mixed with a sterilising tablet or liquid | No | No power needed, safe for heat-sensitive items, good for travel | Takes longer per soak, must change water daily, slight smell |
Choosing between steam and cold water
Steam is popular because it uses only plain water. There is no chemical smell left on the teats. Electric and microwave steam units also finish much faster than a cold water soak.
Cold water soaking has one big plus. It uses no heat at all. Some soft plastics or special feeding cups warp in steam. Cold water tablets work safely on those items. You also do not need a power point, which makes cold water handy for camping or power cuts.
How to choose an electric steriliser and dryer
If you decide to buy an electric steriliser and dryer, do not just pick the most expensive box. Look at how the machine fits your bottles, your kitchen, and your routine.
1. Check bottle capacity and height
Most large units hold six standard bottles plus teats and caps on a top tray. Some taller, slimmer units fit tall bottles better. Wide-neck bottles take up more room across the bottom rack.
Measure your tallest bottle before buying. Some tall glass bottles or anti-colic bottles with long inner tubes need extra height. Check if the middle post or top tray can be removed to fit odd shapes like breast pump shields.
2. Look at the air filter
A dryer pulls air from your kitchen. Good units have a small filter over the air intake at the bottom. This stops kitchen dust and pet hair from blowing onto clean bottles.
Check how easy it is to buy replacement filters. Some brands use washable sponge filters. Others use paper-style filters that you swap every few months. Never run the dryer if the filter is clogged or missing.
3. Measure your kitchen bench
An electric steriliser and dryer sits on your benchtop every day. Check two things: footprint and height. Make sure you have room to lift the lid off without hitting overhead cupboards.
Also watch where the steam goes. Steam rises straight out of the top vent. Placing the unit right under a wooden cabinet can peel the paint or swell the wood over time. Leave clear space above it.
4. Inspect the heating plate and controls
A flat stainless steel heating plate is easy to wipe clean. Avoid machines with deep grooves around the heater where limescale gets trapped. Look for simple buttons you can press with one hand while holding a baby.
Helpful modes include:
- Sterilise and dry: Runs both steps in one go.
- Sterilise only: Useful when you want speed and plan to use the bottle right away.
- Dry only: Great for drying hand-washed pump parts or bowls without steaming them.
- Storage mode: Some units blow a short burst of warm air now and then to keep the inside dry if you leave the lid closed.
5. Check electrical and material safety
Buy from a trusted local shop so the plug and voltage match your country. Never use a cheap travel adapter for a high-heat kitchen appliance. Check that the unit has an automatic shut-off if the water runs dry.
Look for food-safe, BPA-free materials on all plastic trays and lids. Food Standards Australia New Zealand (FSANZ) and the U.S. Food and Drug Administration (FDA) both monitor chemicals in food-contact plastics. Most modern baby gear is BPA-free, but checking the label is still smart.
6. Be careful with second-hand machines
It is fine to buy a second-hand steriliser if you check it well. Look at the heating plate for heavy rust, cracks, or burnt plastic. Check the power cord for fraying or bent pins.
Make sure the lid seal fits snugly and the plastic is not warped. If the unit has a dryer fan, turn it on to check for loud grinding noises or dusty smells. Always buy a fresh air filter before using a pre-loved unit.
What you can and cannot put inside
Steam reaches boiling temperature, which is 100 degrees Celsius (212 degrees Fahrenheit). That much heat will damage some baby items. Always check the care label on each piece before loading the tray.
Usually safe for steam sterilisers:
- Glass baby bottles (check they are not cracked or chipped first)
- Heat-safe plastic bottles marked as polypropylene (PP) or silicone
- Silicone teats, valves, and dummies (pacifiers)
- Breast pump shields, connectors, and collection bottles
- Hard plastic medicine spoons and syringes (if marked boil-safe)
- Silicone teethers with no liquid or gel inside
Do NOT put inside a steam steriliser:
- Electric breast pump motors, cords, or tubing (moisture ruins motors and is hard to dry inside long tubes)
- Gel-filled or water-filled teethers (they can burst or melt)
- Soft plastic toys or bath toys that squeak (water gets trapped inside and grows mould)
- Wooden spoons or bamboo plates (steam cracks wood)
- Thin plastic bags or disposable bottle liners not made for boiling
- Any item marked "hand wash only" or "do not boil"
Check your teats and dummies often. High heat makes silicone or latex wear out faster over time. Pull on every teat before a feed. Throw it out right away if you see tears, sticky spots, or weak rubber.
Step-by-step: using and descaling your machine
Using an electric steriliser and dryer is simple once you know the rhythm. Follow your own manual first, as water amounts vary by brand.
Daily use
- Pick a safe spot: Place the unit on a flat, dry, heat-proof bench. Keep it away from the edge and out of reach of toddlers. Tuck the power cord back so nobody can pull it down.
- Measure the water: Pour the exact amount of clean water onto the heating plate. Too little water may stop the cycle early. Too much water can splash or leave items wet.
- Load upside down: Stand bottles upside down with the open end facing down. This lets steam rise inside and lets water drip out.
- Place small parts on top: Put teats, rings, caps, and dummies on the top tray. Leave small gaps between items so steam and warm air can move freely.
- Close the lid and start: Make sure the lid sits flat. Choose the sterilise-and-dry cycle.
- Let it cool: Wait for the cycle to finish and cool down before lifting the lid. Open the lid away from your face so rising steam does not scald you.
- Wash your hands before unloading: Clean hands keep clean bottles germ-free. Use the tongs if your unit came with them.
How long do bottles stay sterile?
If you leave the lid closed, most machines keep items sterile for several hours, often up to 24 hours. Check your manual for your model's exact time. Once you lift the lid, air from the room enters.
The NHS advises putting bottles together right after they finish, with the teat and lid on. Store assembled bottles in a clean, dry cupboard. Do not leave them sitting next to raw food or dirty dishes.
How to descale your steriliser
Tap water has natural minerals like calcium. When water boils away on the heating plate, those minerals stay behind. Over time, they form a white, chalky, or brownish crust called limescale.
Limescale stops the heater from working well. It can make the machine shut off too soon or leave a gritty film on bottles. Descale your unit every one to four weeks, depending on how hard your tap water is.
Here is a simple way to descale most units (check your manual first):
- Unplug the machine and let it cool completely.
- Mix equal parts plain white vinegar and water, or use a food-safe citric acid mix as directed.
- Pour the mix onto the heating plate until it covers the scale. Do not turn the dryer fan on with vinegar inside.
- Let it soak for 30 minutes to an hour until the scale softens.
- Pour the liquid out down the sink. Gently wipe the plate with a soft cloth. Never scrub with steel wool or sharp tools.
- Rinse the plate well with clean water. Run one empty steam cycle with plain water to clear any vinegar smell before using it for bottles.
If you live in an area with very hard water, using cooled boiled water or filtered water in the base can slow down scale build-up.
Age stages: when to sterilise and when to stop
How long you need to sterilise depends on your baby's age, health, and where you live. Different countries give slightly different advice. Here is a simple look at how care changes as your baby grows.
| Baby's age | What is happening | What most parents do |
|---|---|---|
| Newborn to 2 months | Immune system is brand new. Frequent feeds day and night. | Sterilise all bottles, teats, and pump parts after every wash in all four countries. |
| 2 to 6 months | Baby grows stronger. Some start putting hands and toys in mouth. | Keep sterilising in Australia and the UK. In the US and Canada, ask your doctor if hot dishwasher cycles are enough for healthy full-term babies. |
| 6 to 12 months | Baby starts solid food and open cups. Crawling on the floor. | Australia and the UK still advise sterilising formula bottles until 12 months. Wash spoons and bowls in hot soapy water. |
| 12 months and older | Baby moves to cow's milk or water in open cups. Bottles are phased out. | Sterilising is no longer needed for healthy toddlers. Wash cups and dishes in hot soapy water or the dishwasher. |
Note one rule for solid food gear: bowls, spoons, and bibs do not need to be sterilised once your baby starts solids around 6 months. Just wash them well in hot soapy water or a dishwasher. Keep sterilising milk bottles and teats for as long as your local health service recommends.
Official advice in Australia, the UK, the US and Canada
Health and product safety bodies in Australia, the UK, the US, and Canada all agree on the basics. Wash with hot soapy water first, keep gear dry and clean, and buy safe electrical goods. Where they differ is how long to keep sterilising.
| Topic | Australia | UK | US | Canada |
|---|---|---|---|---|
| Main health bodies | NHMRC, Raising Children Network, Pregnancy, Birth and Baby | NHS (National Health Service) | CDC (Centers for Disease Control and Prevention), FDA | Health Canada, Caring for Kids (Canadian Paediatric Society) |
| How long to sterilise bottles | Until baby is 12 months old | Until baby is at least 12 months old | Focus on under 2 months, premature, or weak immunity; daily sanitising optional for older healthy babies if washed in hot dishwasher | Before first use and for babies under 4 months or unwell; hot soapy water or dishwasher often fine for older healthy babies |
| Product safety body | ACCC / Product Safety Australia | Office for Product Safety and Standards (OPSS) | CPSC (Consumer Product Safety Commission) | Health Canada |
| Chemical / plastic body | Food Standards Australia New Zealand (FSANZ) | UK food safety rules and OPSS | FDA and CPSC | Health Canada |
In Australia, the National Health and Medical Research Council (NHMRC) Infant Feeding Guidelines say to sterilise all bottle-feeding gear until 12 months. Raising Children Network and Pregnancy, Birth and Baby share the same rule. Even if your tap water is safe to drink, bacteria can still grow in tiny scratches inside used plastic bottles.
In the UK, the NHS gives the same clear message: sterilise all feeding gear until your baby is at least 12 months old. The UK Office for Product Safety and Standards (OPSS) also reminds parents to buy electrical baby gear from trusted sellers so it meets local plug and fire rules.
In the US, the CDC says sanitising is extra important for babies under 2 months old, babies born early, or babies with health problems. For older, healthy babies, the CDC says daily sanitising may not be needed if you wash bottles well in hot soapy water or a dishwasher with a hot water and heated dry cycle.
In Canada, Caring for Kids (from the Canadian Paediatric Society) and Health Canada advise sterilising bottles, rings, and teats before first use, and keeping up sterilising for young babies, especially in the first four months or if a baby is unwell. Always check with your own doctor or child health nurse if your baby was born early or has a medical condition.
For product safety, watch recalls in your country. You can check Product Safety Australia (ACCC), OPSS in the UK, the CPSC in the US, and Health Canada recalls online.
Common mistakes to avoid
Even simple benchtop machines can cause trouble if used in a rush. Watch out for these seven common mistakes:
- Skipping the soapy wash: Putting milky bottles straight into the steriliser bakes milk residue onto the plastic. It also smells bad. Always wash and rinse first.
- Opening the lid too early: Steam inside the tub is as hot as a boiling kettle. Lifting the lid mid-cycle or right at the end can burn your face, hands, or arms.
- Leaving wet bottles shut inside a steam-only unit: Without a drying cycle, warm damp air inside a closed tub turns into a cosy home for germs after a few hours.
- Tucking the machine under low cupboards: Hot steam can damage kitchen wood, peel paint, and drip back down onto the machine.
- Forgetting to dry or replace the air filter: A dusty filter blows dust onto clean bottles and makes the fan work too hard, which can overheat the base.
- Touching clean teats with dirty hands: Washing your hands before unloading matters just as much as running the cycle.
- Using scratched or cloudy bottles: Deep scratches inside old plastic bottles trap milk and bacteria. Replace bottles when they look cracked, warped, or cloudy.
Frequently asked questions
Can an electric steriliser and dryer replace washing bottles?
No. You must always wash bottles, teats, and caps in hot soapy water and rinse them before sterilising. Steam kills germs, but it cannot scrub away fat or dried milk. Leftover milk can shield bacteria from the steam.
How long do bottles stay sterile inside the machine?
If the lid stays closed and the unit has dried the bottles well, most brands say items stay sterile for up to 24 hours. Check your manual to be sure. Once you open the lid, take out the bottles you need and put them together with clean hands.
Are electric steam sterilisers safe for silicone and plastic bottles?
Most modern baby bottles are made from glass, silicone, or heat-safe polypropylene (PP) plastic. These handle steam heat well. Always check the bottle box or base to make sure it is marked boil-safe or steam-safe. Avoid heating cracked glass or old, scratched plastic.
Do I need distilled water, or can I use tap water?
Tap water is fine for most machines, as long as it is safe drinking water. However, tap water contains minerals that leave white scale on the heating plate. If your area has very hard water, using filtered or distilled water cuts down on descaling work.
Can I sterilise breast pump parts in an electric steam steriliser?
Yes, you can sterilise washable pump shields, valves, and bottles if the pump maker says they are heat-safe. Never put electric pump motors, batteries, or long air tubes inside a steam steriliser. Water trapped inside tubing is very hard to dry and can grow mould.
Why does the heating plate get brown or chalky spots?
Chalky white or brown spots come from minerals in tap water drying on the hot metal plate. This is normal limescale, not rust. Soak the plate with plain white vinegar or citric acid as your manual explains, then rinse well before the next use.
When can I stop sterilising baby bottles?
In Australia and the UK, official guides say to keep sterilising bottles and teats until your baby turns 12 months old. In the US and Canada, health groups say healthy full-term babies may move to careful hot soapy washing or a hot dishwasher cycle after the first 2 to 4 months. If your baby was born early or has a weak immune system, ask your doctor first.
Sources
- NHS – Sterilising baby bottles
- CDC – Infant formula preparation and storage
- Raising Children Network – Baby formula: how to make and store it
- NHMRC – Infant Feeding Guidelines
- Caring for Kids, Canadian Paediatric Society – Feeding your baby in the first year
- Food Standards Australia New Zealand – Bisphenol A (BPA)
- U.S. FDA – Bisphenol A (BPA): use in food contact application
- UK Government – Buy safe, be safe
Pramod Rimal
Founder & editor
Practical, evidence-led guides for Australian families. We check claims against Australian standards and official health and safety guidance, and link our sources so you can check them too.
Visit Pramod Rimal’s website →About us and how we research →
Related guides
More Feeding & Baby Food →
Electric Steam Bottle Sterilisers and Dryers: How They Work and How to Choose
16 Oct 2026 · 14 min read
UV-C LED Sterilisers vs Steam Microwave Bags for Baby Bottles: How They Work and Which to Choose
2 Oct 2026 · 13 min read
Electric Bottle and Food Pouch Warmers: How to Choose and Use One Safely
9 Oct 2026 · 15 min read













